Airmar P66-8 600W Transom Mount Transducer Furuno 8-Pin DST

Fits: Units with 8-pin Furuno connector

The P66 TRIDUCER® multisensor features our 50/200 kHz, dual-frequency, single-ceramic element. This hydrodynamic housing with a rounded nose reduces the turbulence under the transducer’s face for accurate high-speed readings and clear display images.

The P66 is the best performing and most popular, transom-mount, TRIDUCER® multisensor in the market for many reasons. Foremost, the 50 kHz and 200 kHz, oversized, ceramic element produces focused beams, highlighting detail in the water column and in the bottom structure.

Because of its hydrodynamic shape, water coming off the transom flows smoothly under the transducer face. This results in accurate, high-speed, depth readings and clear display images. Going a step further, the P66 TRIDUCER® multisensor also incorporates a patented noise-suppression system. The result is a 5 to 8 knot (6 to 9 MPH) improvement over standard construction through improved shielding from noise and vibration. And the plastic release bracket lets the P66 rotate up to protect the housing if struck from the front.

Features:

• 50/200 kHz
• 600 W RMS
• Cone: 45° / 11°
• Best performing transom-mount TRIDUCER® multisensor
• Plastic kick-up bracket
• Transom-Mount, Plastic Housing
• Depth, speed, and temperature in one housing
• Maximum Depth Range:
• 50 kHz— 235 m to 353 m (800’ to 1,200’)
• 200 kHz—118 m to 206 m (400’ to 700’)
• Boat Size: 5 m to 8 m (18’ to 25’)
• Accommodates transom angles between 2° and 20°

Downloads:

• Brochure / Specifications
  
• Installation Instructions (pdf)

Airmar Recommends:

• Anti-fouling paint should be used anytime a transducer is exposed to saltwater. Parking the boat in fresh or brackish water will not prohibit barnacle growth.