Airmar P66-235-DT0 600W 235 kHz Transom Mount Transducer NMEA 0183 Depth and Temperature Only - No Connector

Fits: NMEA 0183 Instruments

The P66 multisensor features our 235 kHz, dual-frequency, single-ceramic element. This hydrodynamic housing with a rounded nose reduces the turbulence under the transducer’s face for accurate high-speed readings and clear display images.

The P66 is the best performing and most popular, transom-mount, transducer in the market for many reasons. Foremost, the 235 kHz, oversized, ceramic element produces focused beams, highlighting detail in the water column and in the bottom structure.

Because of its hydrodynamic shape, water coming off the transom flows smoothly under the transducer face. This results in accurate, high-speed, depth readings and clear display images. Going a step further, the P66 transducer also incorporates a patented noise-suppression system. The result is a 5 to 8 knot (6 to 9 MPH) improvement over standard construction through improved shielding from noise and vibration. And the plastic release bracket lets the P66 rotate up to protect the housing if struck from the front.

Features:

• NMEA 0183
• 600 W RMS
• Cone: 45° / 11°
• Best performing transom-mount transducer
• Plastic kick-up bracket
• Transom-Mount, Plastic Housing
• Depth and temperature only
• Maximum Depth Range:
• 50 kHz— 235 m to 353 m (800’ to 1,200’)
• 200 kHz—118 m to 206 m (400’ to 700’)
• Boat Size: 5 m to 8 m (18’ to 25’)
• Accommodates transom angles between 2° and 20°
• 10M Cable

Downloads:

• Brochure / Specifications
  
• Installation Instructions (pdf)

Airmar Recommends:

• Anti-fouling paint should be used anytime a transducer is exposed to saltwater. Parking the boat in fresh or brackish water will not prohibit barnacle growth.