Airmar SS264W 1kW 50kHz Wide-Beam Stainless Steel Transducer 12-Degree Tilt Navico 9-Pin xSonic

Fits: Navico 9-Pin xSonic units

See the Wider Picture!

Airmar has taken the SS270W, wide-beam thru-hull and split it into a pair of Tilted Element™ transducers—one for each frequency. The low-profile design is perfect for fast, trailered, tournament and sportfishing vessels that cannot install a thru-hull with a High-Performance Fairing. The 200 kHz transducer has four times the beamwidth of other top performers. This means marking more game fish and bait in a larger area, increasing your catch.

Since the beamwidths are the same at both frequencies, a split-screen, fishfinder display will clearly show the same water column and bottom coverage. Fish will also appear as arches. More fish will be marked while trolling or underway. At anchor, see which direction the baits and chum are flowing in the current. Get the wider picture on your sounder with an SS264W pair.

Features:

• Consists of two transducers (purchased separately):
• SS264 50 kHz wide-beam
• SS264 200 kHz wide-beam
• Transducers must be purchased separately for dual-frequency operation or individually as a single-frequency unit
• Thru-Hull, Stainless Steel Housing
• Depth and temperature
• High Performance 1 kW RMS
• Cone: 25°
• Maximum Depth Range: 50 kHz— 400 m to 610 m (1,500’ to 2,000’)
• Fixed 20° tilted version for 16° to 24° hull deadrise
• Fixed 12° tilted version for 8° to 15° hull deadrise
• Fixed 0° tilted version for 0° to 7° hull deadrise
• Provides 4 times the beamwidth at 200 kHz than other high-performance transducers
• Low-profile protrusion below the hull— no affect on your boats running performance
• Boat Size: 8 m to 11 m (25’ to 35’)
• Usable Shaft Length: ~71 mm (2.80”)

Downloads:

• Brochure / Specifications (pdf)
• Installation Instructions (pdf)