Hubbell YQ100Plus Intelligent Y Adapter 100A 125/250 - 2 50A 125/250

YQ100PLUS - Safely powers a 100A, 125/250V AC boat from two 50A 125/250V AC receptacles at dockside -or- from a single 50A 125/250V AC receptacle acting as a single adapter.

The YQ100PLUS Adapter must be plugged into two 50A,125/250V AC receptacles that are on the same phase to achieve 100 amp, 125/250 volts power -or- the “A” leg 50A male into a single 50A, 125/250V AC receptacle to achieve 50 amp, 125/250 volts power.

********IMPORTANT*****

THIS ADAPTER MUST BE CONNECTED TO AN ONBOARD, CENTER-TAPPED ISOLATION TRANSFORMER OR SHORE POWER CONNECTOR. DO NOT USE THIS ADAPTER IF SUCH A TRANSFORMER OR CONVERTER IS NOT AVAILABLE.

Model YQ-100Plus Features:

• Safely powers a 100A, 125/250V AC boat from two 50A, 125/250V AC receptacles at dockside - or - from a single 50A, 125/250V AC receptacle acting as a single adapter.
• 4-prong Female 100A end
• Fully molded Hubbell Plugs
• 50A Plugs connect to 50A shore power
• Environmentally sealed against rain, humidity and fog
• Indicator lights indicate correct polarity and safe operation
• Smaller, lighter-weight enclosure
• "A" leg for accessing a single 50A, 125/250V receptacle
• Cord clamps helps to prevent strain on terminals
• Full feature Hubbell Connector
• No for use with GFI Breakers
  

Internal Logic Senses that:

• Both plugs are fully engaged (i.e., one is not dangling loose while the other is plugged in) -or- the “A” leg plug is engaged to access a single 50A, 125/250V receptacle.
• The polarity of the receptacle on the dock is correct (i.e., no mis-wiring of the hot and neutral wires).
• The two receptacles are from correct phases.

• Dimensional Drawing
• Insallation Sheet

• Application: "Y" Adapter
• Color: Yellow
• Insulation: Insulated Body
• Material: Composite
• Number Of Pins: Male- 2) 50A 125V Twist-Lock®
• Operating Temperature: Max Continuous- 75 Degrees C, Minimum- -40 Without Impact
• Receptacle Type: Female- 50A 125/250V Twist-Lock®

• Amperage Rating: 50 A
• Current / Amperage Rating: 50 A
• Current Rating: 50 A
• Voltage Rating: 125/250 VAC
• Wattage: 12500

Note: The YQ100PLUS Adapter must be plugged into two 50A,125/250V AC receptacles that are on the same phase to achieve 100 amp, 125/250 volts power -or- the “A” leg 50A male into a single 50A, 125/250V AC receptacle to achieve 50 amp, 125/250 volts power.

********IMPORTANT*****
THIS ADAPTER MUST BE CONNECTED TO AN ONBOARD, CENTER-TAPPED ISOLATION TRANSFORMER OR SHORE POWER CONNECTOR. DO NOT USE THIS ADAPTER IF SUCH A TRANSFORMER OR CONVERTER IS NOT AVAILABLE.