ShipModul 1120 MINIPLEX-2S 4 In/2 Out NMEA 0183 Multiplexer

The MiniPlex-2S is an advanced NMEA multiplexer, combining data from up to four navigation instruments into two NMEA outputs and an RS–232 port. It also supports AIS and other high speed NMEA devices up to 57600 Baud. The MiniPlex-2S has a rich set of features and configuration options, enabling the user to tackle almost any NMEA bottleneck or interface problem.

The supplied Windows utility MPX-Config allows full configuration of the multiplexer and monitoring of NMEA data passing through the multiplexer. MiniPlex-2S 4 In / 2 Out NMEA 0183 Multiplexer ShipModul® 1120 MiniPlex-2S Multiplexer Scan this Q-code to access the ShipModul® webpage to download MiniPlex-2S complete technical specifications, latest firmware updates and User Manual.

MiniPlex-2USB Features

• Data from multiple instruments is available as one single stream on one single cable
• All inputs are galvanically isolated, eliminating ground loops between instruments plus full galvanic isolation on the USB port,
  eliminating ground loops between multiplexer and computer which are often on separate power grids
• The MiniPlex allows you to fully control the source, the destination and the rate of each individual NMEA sentence by its
  powerful sentence filtering and routing facility
• Automatic switching between computer navigation and GPS based navigation and Automatic switching between primary
  and secondary instruments in case of failure or invalid data. Two NMEA outputs (talker ports) allow distribution of the NMEA
  data to up to eight instruments.
• Two NMEA outputs (talker ports) allow distribution of the NMEA data to up to eight instruments.

The MiniPlex-2S can be connected to a computer through its serial interface for computerized navigation; stand-alone operation is also possible. The supplied Windows utility MPX-Config allows full configuration of the multiplexer and monitoring of NMEA data passing through the multiplexer. All MiniPlex’s with firmware version 3.00 and higher can be updated. Check the ShipModul® website for new MiniPlex features and updated firmware files.